Engine Stop Leak Valvoline 300ml

Valvoline Engine Oil Stop Leak is suitable to be applied to all diesel and petrol engines, as well as motor oils and engine seals that are in common use. It is recommended to apply Valvoline Engine Oil Stop Leak whenever you notice an increase in oil consumption and oil loss through sweating gaskets. Universal application, which makes it possible for this product to be suitable for both petrol and diesel engines and all types of commonly used engine oils. Quick and easy application. A highly-efficient solution that provides instant results immediately after application. Prevents environmental pollution caused by uncontrolled engine oil leakage. The application of Valvoline Engine Oil Stop Leak is easy and can be done without using any kind of special equipment. Firstly, add the content of a 300 ml metal bottle of the product to a minimum of 3 litres of oil. Leave the engine idle for approximately 10 minutes to enable the product to properly mix with the oil. Then check whether there is any leakage in the oil system. If the leakage does not stop in 3 days, the seals are probably damaged and need to be replaced. Important note: Do not exceed maximum crankcase capacity. Dosage: 300 ml of Valvoline Engine Oil Stop Leak is suitable for 5 litres of engine oil. The product is safe for the engine if it does not exceed 10% of the total engine oil concentration. *Check the owner's manual and/or product information sheet before use.

Aanvullende informatie:

• Applications
• Benefits
• Valvoline Engine Oil Stop Leak is ideal when you are in need of an instant solution that provides long-lasting results. Some of its core features are:
• Operating instructions