SPB Motip 1K Epoxy Primer Grey 500ml

MOTIP 1K Epoxy Primer is a high-quality universal primer for the pretreatment of steel, stainless steel, galvanized steel, aluminium, and anodised aluminium. It is ideally suited as a primer before applying water-based and solvent-based base coats and 1K and 2K top coats. The surface must be clean, dry, and free of grease. Remove loose old paint and rust, and sand the surface. Shake the spray can for 2 minutes before use and spray a sample. Best application temperature 10 to 25°C. Apply the epoxy primer in several thin layers, maintaining a distance of approximately 15 to 20 centimeters from the surface to be treated. Before applying the next layer, it is important to shake the spray can well again. After use, clean the valve (turn the spray can upside down and press the nozzle for approximately 5 seconds). The drying time depends on the ambient temperature, air humidity, and the thickness of the applied paint.

Additional information:

• 1K Epoxy Primer
• Features
• Applicable wet-on-wet
• Excellent coverage and filling properties
• Can be painted over with all paint systems
• Excellent protection against corrosion
• Quick drying
• Instructions for use
• Read the instructions on the packaging carefully before use and act accordingly.